Model T · Standalone · For performing

Every key you play, in light.

The iPiano LED Visualizer Model T plugs into your piano's 5-pin MIDI OUT and runs from a USB powerbank. Pick from 55 color effects and watch your playing come alive on stage, on camera, or at home.

55color & effect modes
250LEDs on an 88-key strip
5-pindirect MIDI OUT connection
5 VUSB powerbank powered
Plug-n-Playeasy to carry, boots in seconds
Effect Lab

Play it. See it.

This strip is simulated with the same color rules the Model T firmware uses. Click or tap the keys (press low on a key for a harder touch), type on your letter keys, or press Auto-play.

Effect
Brightness
200
LEDs per key
Touch force (letter keys)
90
Split key
C4
Show
LED strip

Auto-play is showing every color on all three strip types while it plays a set of practice pieces, one after another. Press Stop auto-play, or just play a key, to take over. Letter keys A S D F G H J K L (and W E T Y U) play C4 upward; Left/Right arrows change the effect.

iPiano Web Visualizer

Every note you play on the piano above also rises here in its LED color, as in the iPiano Web Visualizer.

All 55 effects

Every color mode, in motion.

Below are the colors and effects available on the iPiano LED Visualizer, simulated for you to get some idea. Click on each effect and it will be selected on the Effect Lab’s simulated piano above. Play and get some idea.

*This is a simulation only, the actual effect may be slightly different.

Colors on screen are brighter and more saturated than a camera sees on a real strip, and real LEDs vary a little by batch. The Model T also has a split-key setup mode (“SK”) that sets where the keyboard divides into left and right colors.

Controls

Two touch pads. That's the whole interface.

Change colors and brightness without stopping to play. Try the touch pads below: they drive the Effect Lab above.

Illustration of the touch-pad workflow. The real display layout may differ.
  • UP pad: next color mode, instantly, while you play.
  • DOWN pad: brightness up in steps of 10, wrapping back to the dimmest.
  • Both pads, short touch: panic-clear if a light is ever stuck on.
  • Both pads, hold: jump 10 colors ahead; hold longer to open the settings menu.
  • Settings menu: default color, brightness, octave width, first key, LEDs per key, keyboard split key, touch sensitivity, display theme, save and reset.
Specifications

Model T at a glance

A standalone, plug-and-play add-on for your existing piano or keyboard. It is an accessory, not a musical instrument.

250 LEDs

Flexible LED strip

Addressable RGB LEDs on a flexible silicone strip, 200 LEDs per meter. Length is matched to your keyboard (88-key shown).

5-pin MIDI

Direct DIN connection

Connects straight to the traditional round MIDI OUT port of your piano or keyboard.

Dual-core

Fast processor

A dual-core ESP32-S3 with extra RAM for smoother, richer effects, and a boot-up in seconds.

5 V USB

Powerbank powered

Runs from any 5 V USB power source. A powerbank is recommended, which makes it easy to carry to gigs.

Display + touch

Simple menu

A colorful, informative display and two touch buttons. No apps and no tools needed.

Velocity

Reacts to how you play

Brightness or color can follow how softly or hard you press each key.

Split keyboard

Two colors, two hands

Divide the keyboard at any key and give each side its own color.

Stage-ready

Plug-n-Play

Works standalone with your piano. Built for concerts, live events and showing off your playing.

Compatible withPianos and electronic keyboards with a traditional 5-pin (round) MIDI OUT port. Up to 88 keys, at various key sizes.
Not compatible withKeyboards that offer MIDI only over USB.
PowerExternal 5 V USB source; a powerbank is recommended.
LED strip typesChoose your strip: Type B matt black (round dots), Type L black with a linear light effect (rectangular dots in a line), or Type W white with a blurred effect (out of stock for the moment).
LED strip250 addressable RGB LEDs, flexible silicone, 200 LEDs/m (88-key length shown; scales with key count).
Color & effect modes55 modes plus a split-key setup mode. Basic colors, split-keyboard two-color, velocity brightness, velocity color change, gradients, random, multi-instrument, same-note, octave, full-range color bar, fading notes, matrix, fire, ripple, harmony, negative and inverted.
Brightness10 to 255, adjustable in steps of 10.
Fit to your keyboardAdjustable octave width (100 to 250 mm), adjustable first key, and a choice of LEDs per key.
ControlsTwo touch buttons and a colorful information display with a simple settings menu. Settings are saved on the unit.
Safety netsPanic-clear gesture, and automatic clearing of lights if MIDI goes quiet for a few seconds (guards against a missed note-off).
Power-onRainbow start-up animation, ready in seconds.
CustomizingCustom keyboard sizes, your band name or logo, and custom visualizations or colors on request (fees may apply).

Great for

  • Concerts, live events and stage shows
  • Showing off your playing on video, as seen on YouTube
  • Practicing and playing at home with colorful feedback
  • Two-color playing with a hand split

What you need

  • A piano or keyboard with a traditional 5-pin (round) MIDI OUT port
  • A 5 V USB power source (a powerbank is recommended)
  • Your piano's brand, model and key count, so we can build it to fit
Will it fit?

Check your piano in 10 seconds

Model T is custom-built to match your keyboard, so we always check before you order. This quick check tells you where you stand.

Compatibility check

Which MIDI output does your piano have?

Pick an option to see the answer.

How many LEDs for my keyboard?

An indicative guide, worked out from 200 LEDs per meter and standard key sizes. Your final strip is cut to fit.

Keyboard key sizes differ between brands, which is why we ask for your piano's brand, model and key count.

Setting up takes three steps

1

Plug into MIDI OUT

Connect the i-Piano 5-pin DIN connector to your piano or keyboard's MIDI OUT port.

2

Power it up

Connect the USB connector to a powerbank (or other 5 V USB source).

3

Set up and play

Choose your color, set your brightness and split key, and start playing.

Order or ask

Every Model T is built for your piano.

Please contact us before you buy. Send your piano or keyboard's brand, model number and number of keys, and we will make sure you get the right model.

Message to send us

Copy this, fill in the blanks, and send it to us on Etsy.

Hello! I'm interested in the iPiano LED Visualizer Model T.

Piano / keyboard brand:
Model number:
Number of keys:
Does it have a 5-pin MIDI OUT port? (yes / no / not sure):
Special requests (band name or logo, colors, key size):

From $189 for the 88-key version; price scales with key count.

Custom builds

  • Custom keyboard sizes
  • Your band name or logo
  • Custom visualizations and colors (fees may apply)
  • More features than we advertise, for free

Tell us your special requirements and we will guide you to the best match.

Real photos

The real thing, lit up

iPiano LED strip mounted above a keyboard
Strip mounted above the keys
Rainbow gradient LEDs lit across the keys
Rainbow gradient
Blue LED gradient along the keyboard
Blue gradient
Pink and purple LED gradient close-up on the keys
Pink and purple
Please note: this item is not a musical instrument. It is an accessory for your existing piano or music keyboard.
Pianos with MIDI over USB only are not compatible. Extension cables and converters may be needed depending on your piano.
Some instrument makers use their own MIDI standards on certain keyboards, so the listed effects may not work consistently on every keyboard. Some additional skills and tools for video recording and editing are needed to film your playing.
The Effect Lab and effect cards are a simulation for illustration. Real LED color and brightness vary with the strip, camera and room lighting. More technical details: midivisualizer.com. Piano sound in the Effect Lab: Salamander Grand Piano by Alexander Holm (CC BY 3.0), played with Tone.js.